Many thanks to K7DFW who provided me with this info:
"The model number is molded into the connector on the green ones but not on the tan ones. It's MSTB2.5."
On my connectors there were no molded or stamped ID numbers but a quick search on Mouser with MSTB2.5 provided me with:
C
CLICK
to ENLARGE
Note that the 3 P is the part designator for number
of pins and in this case for the control head I need 10 pins.
Screws hold wires in place, 2 guide pins
Female pins with round housing.
Very easy to attach the wiring harness, excellent
connector for "Field" use.
Pressure fit, does not lock in place.
